All posts by TWPvalmet

Extending the Life of Your Boiler With Tube Shields

To prevent the need for costly, time-consuming boiler system repairs, consider using custom tube shields. Tube shields are an effective solution for protecting your boiler’s tubes, helping to prevent both erosion and corrosion. These shields are also very cost-efficient, involving a minimal initial investment while allowing for far-reaching, long-lasting effects. In fact, tube shields can significantly extend the life of your boiler.

Tube shields can be specially designed to fit each unique boiler system, ensuring optimal protection of boiler tubes and greatly reducing the risk of failure. These shields offer three main benefits: cost efficiency, easy customization, and stockability.

3 Key Benefits of Boiler Tube Shields

Cost Efficiency

Tube shields can save you money in more ways than one. First, tube shields are one of the most inexpensive methods for protecting your boiler tubes from general wear and tear. Though these shields are cheap, they serve as an extremely effective protective covering for tubes, guarding against corrosive and abrasive elements in your boiler. Second, tube shields — despite being a very inexpensive investment — tend to provide long-lasting returns.

Designed to protect your boiler’s tubes from the damage that can result from normal operation, these shields will help minimize the need for ongoing maintenance and repairs. Tube shields also significantly reduce the risk of downtime, which can seriously impact overall productivity while upping labor needs.

Easy Customization

curved tube shieldTube shields are also highly customizable, and many companies are able to specially design shields to fit specific tubes. Working with an experienced team that can create unique shields for your particular boiler will not only ensure that the shields perfectly fit your tubes, it will also protect them to the highest degree possible.

Customization is an effective way to optimize boiler tubes’ resistance to corrosive or abrasive elements while minimizing the potential for failure. Below are a few examples of customized tube shields:

  • 370° tube shields — Designed for “new” shop applications, these shields completely cover the tube’s surface without the need to overlap two shields.
  • Custom curved shields — These are manufactured to cover the tube’s outside and inside curves.
  • Custom economizer shields — These are designed to effectively protect fin tubes while accommodating the tube’s outside diameter, angle of wrap, and fin
  • Custom straight shields — This type of shield is manufactured with straight ends, belled ends, or flared legs.

Stockability

Valmet keeps a stocked inventory of tube shield material, which means they will be available to be manufactured quickly whenever you need them. We also work with many of our customers to plan for anticipated inventory needs. From there, companies can easily forecast how many shields you may need in a year, and we can manufacture them in advance at a discounted rate. Valmet can then keep these extra shields on hand and ship them as needed.

With this smart stocking plan, companies avoid the headache of extended shutdowns resulting from unexpected boiler repairs, and never have to wait on potentially unreliable delivery. Having access to backup shields gives customers peace of mind in the event of an emergency, so even the most unexpected situations can be addressed with ease.

Learn More

Valmet is proud to be a leading global developer and supplier of cutting-edge technologies, automation, and services for clients in the pulp, paper, and energy industries. Our skilled team works closely with customers to provide top-of-the-line, customized tube shield solutions to meet specific boiler system needs.

In addition to being known for our value, we’re also known for our fast turnarounds. We can quote your outage delivery requirements on a same-day basis, and over 50% of our orders are capable of shipping within 24 hours.

To learn more about Valmet’s tube shield capabilities and discuss how they can help protect your boiler system, contact the team today.

Pressure Parts Fabrication from Valmet

Each year our fabrication efforts continue to grow.

We can create most any boiler pressure parts including complete boiler retubes on loose tube bending and tube panels from carbon, alloy, stainless, composite and Inconel.

Other capabilities include complete or partial Superheater and Reheater elements with attachments, economizer bundles, generating banks, tube swages, shotblasting, dissimilar metal welds, straight tubes, and headers.

Keeler Boilers & Replacement Parts

As the exclusive owner of the inventive Keeler boiler drawings and contract files, Valmet Power has all the primitive drawings and contract files for the over 7000 manufactured Keeler boilers. In addition to our in-house stock of standard Keeler fabricated parts and original drawing specs, we have the ability to construct replacement tubes, headers, casing panels, doors, manhole plates, hand hole plates, (both with yokes and gaskets), key caps (with 40+ sizes), key cap pullers, Keeler special shape tiles, standard tile and insulation, soot blower, and more.

 

 

 

 

 

A Global Solutions Company You Can Rely On

Finding a resource for custom parts fabrication can be extremely tedious (and difficult) if you don’t know where to look. Power plants, Waste Incineration Plants, Recovery Boiler Plants, Municipalities, and Mining are some of the bigger areas and industries looking to turn waste into energy with these customized parts.

At Valmet, we’re always looking for innovative ways to make your everyday easier at a reasonable cost. Finding high-quality materials at a rational price is a relatable pain point that we work to overcome.

You’ll receive fast turnaround time when it comes to our custom manufacturing and parts fabrication.

Some of our parts and specialty services include:

  • Piping (code & non-code applications)
  • Processing plate, waterjet, laser, plasma
  • Structural parts, feeders, hoppers, conveyors
  • Welding
  • ASME tanks, components, & skids (turnkey)
  • Light structural (beams, service platforms, handrails, etc.)
  • Industrial boiler ducting
  • Tubes (straight, bent, WOL)
  • Pressure parts
  • Production machined parts & more!

The Valmet team will enhance your system reliability and operational efficiency. We service many industries including Paper & Pulp, Construction, and Waste to Energy. With our in-field services expanding, we’re the ideal option for power outages, broken, and/or outdated machinery.

For help with your boiler and small pressure parts, or any other pieces and services that we offer, stay up to date with our blog entries, Facebook page, Twitter, and LinkedIn.

To speak with a representative now, contact us today.

Dispose of Your Biosludge with this New & Improved System

Getting rid of secondary sludge, or biosludge, has always been an industry issue bringing forward many problems due to its high water content and the nature of the solids contained. With these drawbacks, transportation and disposal become problematic.

As of recent, field experts are focused on improving what we currently know as traditional disposal methods like landfilling or incineration in the power boiler.

Drawbacks to the traditional approaches include:

  • Offensive odor
  • Water leaching from landfill sites
  • Low thermal efficiency
  • Potential health hazards in handling
  • Overall cost of disposal

With landfills for biomass material now banned in Europe, a new approach was needed and for several mills, this was to incinerate the biosludge in the recovery boiler.

Through a proprietary system, the biosludge is hydrolyzed by mixing it with black liquor and then sent off to the concentrator for disposal in the recovery boiler.

New benefits of this approach include:

  • No offensive odor
  • No handling or transfer of the sludge for transport
  • Higher thermal efficiency by using the multiple effect economy of the evaporators
  • Incineration occurs within the recovery boiler with no real change in operation
  • Lower cost solution internal to the mill operations

Current studies reveal that no significant negative impacts have been experienced in the mills that have taken on incineration of secondary sludge within the recovery boiler.

For more of an in-depth look at the recovery boiler system read our recent white paper. The analysis includes an overview of the secondary sludge hydrolysis process, detailed benefits of hydrolyzing and disposing of sludge in the recovery boiler, user experience, and additional links and information on Valmet Automation products for wastewater handling.

Valmet has over 40 years of experience in the boiler system industry. Our skilled team of industry experts can help improve your handling and disposal of secondary sludge needs.

For more information on biosludge disposal methods and recovery boilers remember to stay up to date with our latest blogs, find us on Facebook, follow us on Twitter, and connect with us on LinkedIn.

For immediate inquiries please contact us today.

3 Benefits of Valmet Custom Tube Shields

Boiler tubes are a vital part of boiler curved tube shieldoperations and protecting them is very important as having a boiler down for maintenance can be very costly.  One option to protect boiler tubes is using custom tube shields which are the best choice when it comes to erosion and corrosion control methods for boiler tubes.  These are also the least expensive method for this purpose on the market as tube shields will extend the life of boiler tubing without an initial high cost.   At Valmet we are the top tube shield provider in North America and have the engineering and design capabilities to find solutions to your boiler problems.

Below are 3 reasons you should be using custom tube shields from Valmet:
  • Cost Effective:  Our custom tube shields are the least expensive method for tube protection. Compared to other boiler tube life extender methods they are only a fraction of the cost, and with local North American manufacturing facilitates, they can be Custom tube shieldsproduced and shipped to you faster than anyone else on the market. Our tube shields are custom designed and can be ready to ship within 24 hours.
  •  Custom Options: To meet our customers’ needs we offer multiple options of custom tube shields that are designed to be used for both emergency situations and routine maintenance. Options include custom straight shields, custom curved shields, custom economizer shields, and 370° Tube Shields. Our 24/7 emergency call service ensures that our clients will be able to get a response and the tube shields they need to resolve your emergency.
  • Planning Ahead and Stocking Programs: Our experts can work with you to forecast how many tube shields you will require for the year, and then manufacture them up front for you at a discounted price. Valmet will then store this inventory of tube shields for you, and can ship them to you as needed. This will prevent extend boiler shutdown service and have you prepared for all emergency situations.

At Valmet we care about all our customers and wish to provide the best service for them.  To make things easier for our customers we now accept credit card payments to cut down on paperwork delays and to make the process straightforward and uncomplicated.  Along with lightning fast delivery service and response time, we can work with you to develop the best solutions for your requirements.

For more information please contact Jimmy Simms at (304) 518-1114 to learn more about how our custom tube shields can meet all your tube protection needs.

Valmet’s Custom Spout Plug and Integrated Locking Handle

The spout deck on a recovery boiler is considered the most dangerous area for operators and one of the leading causes of recordable injuries.  As such, all operators know that having to plug a single spout for any reason can be a dangerous and time-consuming process. Proper precautions and safety methods are necessary to ensure the safety of operators attempting to plug the spout, as well as preventing harmful materials from dropping into the dissolving tank and affecting overall operations.  To improve safety in performing this operation, Valmet has recently developed a refractory plug that is custom shaped for the Valmet insertable smelt spout.  This new product is designed to provide a quick and reliable option for operators to intentionally terminate smelt flow to a smelt spout.

How Does it Work?Valmet Spout Plug

The Valmet insertable refractory plug was custom designed to quickly and efficiently plug the smelt flow to a smelt spout when necessary.  It works by using a high temperature rope wrapped around the plug as a gasket to create a tight seal between the metal spout and the refractory plug.  The plug is also high temperature refractory rated for use in recovery boiler lower furnaces, and is designed for both short term and long term use.  All of the Valmet custom plugs are kiln fired over a controlled temperature sequence prior to delivery and are available for immediate use, and are significantly easier, quicker and safer to both install and remove than using a rammable material.valmet handle

The product also includes a stainless steel locking handle integrated into the smelt spout hood enclosure which is designed to quickly install the plug at the proper elevation/alignment and to secure the plug in place to the micro-hood system.  The locking handle anchors the plug in the opening with the gasket compressed so it does not unexpectedly become dislodged.  It takes approximately 10-20 seconds to install and secure in place which is a significant reduction in time and improvement to operator safety by attempting alternative methods.  The locking handle is supported 100% by the micro-hood system to maintain alignment during changes in thermal growth of the boiler.

What are the Benefits of the Reliable Spout Plug?

With the ability to quickly and safely plug a smelt spout,  the ability to perform maintenance work or replace damaged shatter jet parts now becomes safer and more straightforward.  When the plug is in place it is now easier to inspect and clean hood internals while the unit is online.  It also allows for reducing the number of spouts in service to maintain normal smelt flow under lower operating loads.  Customers already using Valmet insertable smelt spouts can purchase these plugs and locking handles as a spare part by obtaining a Valmet “starter kit” which includes all parts needed to begin using the plug.

For more information about the Valmet custom Spout plug please contact our Smelt Spout Product Manager Dan Morrison

Valmet’s 4th Annual Recovery Boiler User Group Meeting

Valmet’s 4th annual Recovery Boiler User Group (RBUG) conference took place this year on January 24 and 25, 2017, in Charlotte, NC. The meeting was held at the NASCAR Hall of Fame located in downtown Charlotte for employees of pulp mills with Valmet Recovery Boilers or other Valmet equipment.  Twenty participants representing six major pulp & paper companies were in attendance, coming from the United-States, Canada and Chile. Valmet participants and other guest speakers also included people from the United-States, Canada, Chile and Finland, giving the meeting a true international flavor.  The theme of the meeting was performance and reliability and the agenda reflected this theme around the areas of safety, reliability and increased efficiency.

Recovery Boiler User Group Meeting Attendees

The meeting started with a review of the status of the industry in North-America and the rest of the world, including expansion projects in Europe where a real boom is being seen with the construction of new modernized mills designed to have a larger capacity. Benchmarking information was presented comparing the mill capacity, average age of the major equipment, wood yield and energy and water usage for those modern European mills as opposed to the average North-American mills. This was followed by an update on the bio-refinery development that are taking place that have the potential to help existing and new pulp mills diversify themselves with additional products offering.

Some of the topics discussed throughout the two day meeting included:Spout plug

  • Auxiliary products to improve safety around the recovery boiler.
  • Dissolving tank operation including a review of a recent dissolving tank explosion, discussions on current recommendations for recovery boiler and dissolving tank operation by BLRBAC and AF&PA to reduce the potential for dissolving tank explosions.
  • Outage experience mostly targeted at what to expect when the interval between major maintenance outages is extended from 12 months to potentially 18 or 24 months.
  • Outage services for the recovery boiler offered by Valmet under the concept Liquor to Liquor. This family of services includes outage planning, smelt bed extraction (Smelt-X), washing and removal from the floor of the water wash salt cake accumulations (Wash-X), inspections services including NDE testing (ATS) and boiler tube internal deposit thickness deposit measurements.
  • Presentation of the technology used to measure the thickness of the deposit and how it was validated against actual DWD from tube samples, as well as the experience using this technique.

Recovery Boiler User Group Meeting Session

The meeting also featured a Team Building / Networking dinner that took place at Victory Lane Karting.  This was a great opportunity for drivers and non-drivers to have a chance to share good food, drinks and entertainment, as well as some competitive spirit amongst the racers.  The meeting ended with a final Q & A session and wrap up discussion.  Overall this was a great event which received much positive feedback from the meeting attendees.

We look forward to next year’s Recovery Boiler User Group meeting on January 22-24, 2018 in Charlotte, NC.   To register please fill out this online form, and for more information on the event please contact Nancy Ries

Improving Safety Around Recovery Boiler Operations

The recovery boiler is a vital part of the pulp mill but also a source of potential safety hazards for its operators. One of the purposes of the recovery boiler is to recover the pulping chemicals from the black liquor which is done in the form of smelt from the bottom of the furnace. A potential hazard of this process is that if the smelt interacts or has contact with water, an explosion can potentially occur which could injure operators and cause damage to the boiler. Besides the risk of explosion, combustion in the recovery boiler creates very hot gases and highly corrosive molten ash which could be hazardous to operators who are performing physical tasks around the recovery boiler.

In an effort to make operations in the recovery boiler safer, and minimize exposure to unsafe working conditions, Valmet has developed and perfected several auxiliary devices that serve to both automate as well as either remove the need for direct operator involvement or to minimize exposure to unsafe working conditions. Below are four inventions and innovations that have improved the working conditions around recovery boilers and made operation of the boiler more stable.

Smelt Spout Micro Hood Arrangement: One area considered the most dangerous for operators, and one of the leading causes of recordable injuries is the spout deck on a recovery boiler. To make smelts more accessible for cleaning and to improve safety, Valmet has developed mini or micro-hoods have to replace the old large hood systems. The benefits of these systems are:

• Easier access to spouts for manual cleaningSmelt Spout Micro Hood Arrangement
• Easier replacement of spouts
• Minimal hood shower water
• Minimal internal ledges
• Cooling water lines not exposed to smelt
• Minimizes tramp air intake
• Dual shatter jets (ShatterMax™)
• Externally mounted shower bar headers
• More reliable mounting interfaces for the smelt spouts.

Spout Cleaning Robot: The DeckHand™ is another new system designed to improve the safety of operators is the development of an independent robotic arm that performs repetitive tasks. The safety benefits of this robot are:

Spout Cleaning Robot

• Greatly reduces the risk of operators getting injured from splashes of green liquor or smelt
• Cleans spouts, hoods & shatter jets
• Robot camera that allows operators to visually inspect spouts from safe control room
• Safety gates designed to stop robot if any personnel enters the spout deck
• Less personnel at the smelt spouts

Liquor Station with Automated Port Rodder: Working around the liquor guns is another area where operators are at risk with large numbers of lifting and burn injuries being reported annually. To make this area safer, the GunnersMate™ liquor stations were developed. The safety benefits are:

Liquor Station with Automated Port Rodder

• Limited operator exposure to furnace
• Station retractable outside furnace
• Safety door protection from opening
• Ready signal for spraying to start
• Improved operator working conditions
• Auto-cleaning cutter reduces amount of manual cleaning required

Automated Port Rodders: The Roddingmaster™ was developed to limit operators from potential exposure to hot air (300 – 400 °F) and limit exposure to the furnace. The safety benefits of automated port rodders are:

Automated Port Rodders

• Improved operator working conditions
• Large observation port
• Control box easy access for remote isolation
• Ability to change the cutter on the run with minimum exposure time in front of opening

 

At Valmet we can help you with all your recovery boiler safety needs. Contact us for more information.

New Liquor to Liquor Lean Concept for Boiler Outages

Planning for a boiler outage can be a stressful and time-consuming process. At Valmet we understand the challenges you face, and have developed a new lean concept for liquor to liquor recovery boiler outages.  This streamlined process will make the boiler outage period easier for you by utilizing efficient techniques and steps that have proven successful.

In the past, the boiler shutdown process has been an incoherent operation with many of the necessary steps being performed without any sense of order or purpose.  With our new streamlined process we have created a Liquor to Liquor Lean Concept that organizes the boiler shutdown period in an ordered and economical fashion.  This is one bundle of services that will make the process simple and easy for you.

Liquor to Liquor Lean Concept for Boiler Outages

  • Step 1: Boiler Outage Planning: During the planning process we can handle technical coordination and spare-parts support. We can identify the maintenance needs, and work on the distribution of tasks with the mill team.
  • Step 2: Smelt-X: The Smelt-X boiler cleaning process uses custom designed ejectors made for each furnace arrangement to extend from spouts to the lowest point in floor for max extraction. With it smelt bed cooling time can be reduced to 4-6 hours from 15-35 hours, while allowing for the recovery of chemicals in the smelt bed, and minimization of wash water volume and alkalinity.
  • Step 3: Wash-X: With our Wash-X process the floor is washed simultaneously with the rest of the boiler using low pressure water sprays and mixing devices installed on the furnace floor. This allows for time spent in recovery to be reduced by 10-30 hours.
  • Step 4: Inspection, Maintenance, Examination: With a full range of inspection and maintenance capabilities, Valmet can manage the maintenance throughout the outage. This includes coordinating and managing a complete portfolio of NDE services including all standard inspections such as ultrasonic thickness surveys, liquid penetrant & magnetic particle inspections, and weld examinations. We also offer a host of advanced inspection capabilities like phased array ultrasonics, near drum inspections, and IRIS tube inspections. To enhance safety and production we can also provide low-energy radiography solutions including conventional, digital, and computed radiography services.
  • Step 5: Chemical Cleaning, Boiler Tube Deposit Inspection: Chemical cleaning services including steam blows, high pressure chemical blasting, hydrolasing and vapor phase cleaning. Also we do boiler tube scale deposit inspection and evaluation.
  • Step 6: Post Maintenance Tests: After the cleaning process is complete we can perform full maintenance tests to evaluate the process, and offer support and information on how to plan and budget future outage work.
  • Step 7: Startup Tuning: With our recovery boiler tuning camera we can inspect the boiler for plugging, tune liquor sprays, emissions troubleshooting, and burner optimization.

Liquor to Liquor Lean concept

The Valmet Liquor to Liquor Lean concept works with a service agreement where a bank of hours can be used in any matter from field service, maintenance management, engineering, emergency call outs and troubleshooting among other areas on an as needed basis.  With multi-year agreement discounts and full transparency on service rates this process is the best value on the market.  We also offer free internet training packages and spare parts discounts along with our lean concept package. For more information about our services and to arrange an in person meeting to discuss how our Liquor to Liquor Lean Concept can work for you, please contact Mike Ward, or speak with us at the BLRBAC Fall 2016 Meeting.

3 Reasons to Choose Wash-X When Cleaning Your Boiler

Each year when it comes time to prepare for a boiler outage, concerns about downtime and potential damage are common.  At Valmet we understand these concerns, and have developed our Wash-X service to make your boiler cleaning process easier and efficient.  Below are three reasons why using Wash-X will change the way you view the boiler cleaning process.

1) Limited Downtime: The timespan of the boiler cleaning process all depends on how long it takes for the smelt bed to cool down.   Wash-X processTypical smelt bed cooling times can be anywhere from 15-35 hours. By using the Wash-X process the smelt bed cooling time can be reduced greatly to 4-6 hours.  This reduced time is accomplished by simultaneously washing the floor with the rest of the boiler using low pressure water sprays and mixing devices installed on the furnace floor.

2) Reduced Risk of Damage: During the boiler cleaning process there is always the risk of damage due to large falling deposits and from mechanical cleaning.  The Wash-X process works with water being sprayed to the flood as soon as safe bed temperatures have been reached.  Then eductors are inserted to start floor washing in parallel with superheater washing.   By using hot water, faster washing occurs and it also is used to dissolve large ash deposits which fall to the floor.   The wash pool that forms also creates a barrier that protects the floor from large deposits which may fall off the wall during the cleaning process.  When the water is drained at the end the remaining deposits can easily be cleaned out, avoiding the need for mechanical cleaning that can cause damage to boiler floor.

3) Unique and Effective: Our Wash-X recovery boiler floor washing service is unique in its ability to wash the floor simultaneously with the rest of the boiler while using low pressure water sprays and mixing devices.   The ability to limit downtime and reduce potential damage is unmatched in the industry.  With successful jobs completed in North America, the Wash-X service will save a huge amount of time and money for companies who need their recovery boiler systems cleaned.

Picture1
Valmet has over 40 years of experience providing full service in the boiler chemical cleaning industry.  Our boiler cleaning services including Smelt-X and Wash-X will save companies time and money and have your boiler operating at full strength much faster than any other process on the market.  For more information about our services and to arrange an in person meeting to discuss how our Wash-X service can work for you, please contact Mike Ward.

 

Valmet – Prepared for your Emergency

At Valmet, we are North America’s top tube shield and tubing Boiler Tubes - for all your tubing requirementsprovider.  We stock an extensive range of stainless steel sheets in varying gauge sizes for tube shield fabrication, as well as boiler tubing and membrane bars in a wide range of material grades and sizes to support both tubing and pressure part manufacturing demand.  All of this material is stocked at our Lancaster, SC Service Center where a team of engineering and manufacturing experts are based and ready to respond to meet your tube and tubing needs.  What really sets us apart and makes Valmet unique though is our commitment to customer service, and our fast response to emergency situations.

Valmet understands the nature of our clients business and the urgency that comes during outages regardless of whether it’s a planned or unplanned situation.  With delivery services ranging from licensed drivers on staff for hot shot services with our local customers, to the capacity for air shipments in responding to unforeseen forced outages due to tube failures in any region of the country, we’ve proven time and again how we deliver results.  Our management team provides the support to Valmet’s 24/7 emergency call service to ensure our clients receive the required response to resolve the emergency.  Where there’s a need, Valmet will “find a way” to get it done.  Quite simply, expect results because we care about you, our customer.  Valmet also accepts credit card payments to cut down on paperwork delays, making it easier for you to do business – regardless of the circumstances!

At Valmet we offer multiple options of custom tube shields to fit all of our customers’ needs in both emergency situations and for routine maintenance.  A few of our options are:

Custom tube shields

Custom Straight Shields – Available with angles of wrap between 90° to 240° and can be manufactured with straight ends, belled ends and flared legs.

Custom Curved Shields – Can be manufactured to cover both outside and inside curves of tubing.

Custom Economizer Shields – Special design that provides effective protection for finned tubes and can be manufactured to accommodate tube OD, angle of wrap and fin height.

370° Tube Shields – Allows for complete coverage of tube surfaces without the need for overlapping two shields.

When it comes to erosion control methods of boiler tubes, our tube shields are the least expensive method for tube protection.  They are only a fraction of the cost of competing methods to extend the lives of boiler tubes.  With our local North American manufacturing facilities, we offer lightning speed service that can have tube shields quickly made and delivered to you. Tubing for airplane

At Valmet we can work with you to forecast how many tube shields you would need for the year, and then manufacture them up front at a discount to you.  We can then store the inventory for you and ship them to you as needed.  This planning ahead and stocking program will make sure to limit your boiler shutdown time and have you ready to deal with any emergency situation.

Please contact Jimmy Simms at (304) 518-1114 to learn more about how our custom tube shields can meet all your tube protection needs and discover how Valmet is prepared for your emergency.